| ECU |
Description |
Part
Number |
  |
86-88 RX7 Platinum Sport 1000 Plug and
Play
Uses all the sensors, including the TPS (Throttle Position
Sensor) that are in the stock car. Nothing else needed!
With this set-up you can fully program your Turbo or
non-turbo car!
Click
HERE
for full description of the P1000 from Haltech. |
HAL-HT051320 |
|
89-92 RX7 Platinum Sport 1000 Plug and
Play
Uses all the sensors, including the TPS (Throttle Position
Sensor) that are in the stock car. Nothing else needed!
With this set-up you can fully program your Turbo or
non-turbo car!
Click
HERE
for full description of the P1000 from Haltech. |
HAL-HT051321 |
 |
93-95 RX7 Platinum Sport 1000 Plug and
Play
Uses all the sensors, including the TPS (Throttle Position
Sensor) that are in the stock car. Nothing else needed!
Will not control the sequential turbos, must use with a
single turbo only.
Click
HERE
for full description of the P1000 from Haltech. |
HAL-HT051322 |
|
Platinum Sport 1000 Computer and Flying Lead
Kit
This is what you need for any 2-Rotor application. Does not
plug in to the stock harness, Haltech harness must be terminated by
installer.
Click
HERE
for full description of the P1000 from Haltech.
No sensors supplied -- pick the ones you want from the
Accessories Page |
HAL-HT051302 |
 |
Platinum Sport 2000 Computer and Flying Lead
Kit
This is what you need for any 3-Rotor application. Does not
plug in to the stock harness, Haltech harness must be terminated by
installer.
Click
HERE
for full description of the P2000 from Haltech.
No sensors supplied -- pick the ones you want from the
Accessories Page |
HAL-HT051402 |
 |
Platinum Sport 1000 Computer and Mazda 13B
Fully Terminated Harness
This is a Universal Rotary Harness for use with LS1 Coils
and pre terminated for use with Haltech Sensors and 86-92 Crank angle
Sensor
Click
HERE
for full description of the P1000 from Haltech.
No sensors supplied -- pick the ones you want from the
Accessories Page |
HAL-HT051203 |
 |
Platinum Sprint RE Computer and Flying Lead
Kit
This budget minded ECU is suitable for use in 2 Rotor
Engines - 2nd and 3rd Generation RX7 (FC3S) and RX8 (SE3P)
Click
HERE
for full description of the Sprint RE from Haltech.
No sensors supplied -- pick the ones you want from the
Accessories Page |
HAL-HT050902 |
 |
ECU Mounting Kit |
HAL-HT039000 |
| Click
HERE for Haltech Wiring Video
|
