(Hardened)
(Turbo)
Oil Pumps, Oil Pump Chains, Temperature and Pressure Adapters
| Mazdatrix Home Page | Click part number for price | View Cart |
| Oil Pumps | ||
(Hardened) (Turbo) |
Application | Part Number |
| 74-85 17.5mm (stock) | 14-1000-8553 | |
| 74-85 17.5mm (w/Hardened Gear Set) | 78-220C-1058 | |
| 13B (86-92 non-turbo) | 14-100A-N326 | |
| 13B (86-92 Turbo) | 14-100A-N318 | |
| 13B (93-95 Twin Turbo) | 14-1000-NF01 | |
| Mazda Comp Dry Sump Kit | ||
 |
Complete Mazda Comp. 13B Dry Sump
Kit (for Racing Purposes ONLY, comes with everything you see in the picture) |
01-SUMP-0000-KT |
| Oil Pump Chains, Pressure Regulators | ||
| 74-85 Oil Pump Chain | 14-1420-0839 |  |
| 86-95 Oil Pump Chain | 14-1510-N326 | |
| (B) Regulator (74-92)
Stock (bypasses oil at 60-70 PSI) |
14-2500-3648 |  |
| 93-95 Stock regulator | 14-2300-N3A1 | |
| (B) Regulator - High
Performance (74-92) (bypasses oil at 80-85 PSI, adjustable) |
11810 |  |
| (C) Regulator - Factory Race
(74-92) (bypasses oil at 105-115 PSI, adjustable, shims provided for front regulator) |
11812 |  |
| Eccentric Shaft Oil Jet | ||
| This oil jet replaces the
factory checkball and spring. These should be used in full race engines only, because the idle oil pressure is noticeably lower. |
11-4110-8553 |  |
| Oil Pressure & Oil Temperature Adapter | ||||
| This adapter mounts under the oil filter and permits easy hook-up for after-market oil pressure (1/8 female pipe) and oil temperature (3/8 female pipe) gauges. Necessary studs and "O"-Rings are supplied. Note: Does Not Fit 83-85 12A with oil-to-water cooler beneath oil filter. | ||||
| 79 and Earlier | 11801 |  |
 |
|
| All 80-92 (except 83-85 12A) |
11802 | |||
| The Oil Filter Bypass Block 1971-95 | ||||
| This block is designed to facilitate the installation of a remote oil filter assembly. Machined from aluminum-alloy with an internal passage that eliminates the need for the stock oil filter, this component is very popular for customized engine and racing applications. | 11822 |
 |
 |
|
| Racing Beat Oil Pressure and Temperature Adapter | ||
 |
The Oil Pressure and Temperature Sensor Adapter unit allows for easy installation of sender units for most popular gauges (1/8-inch female pipe for oil pressure and 3/8-inch female pipe for oil temperature). The machined-aluminum adapter will accommodate either mechanical or electrical senders. The adapter mounts immediately below the oil filter assembly and includes a mounting O-ring and detailed installation instructions. Easily installs by simply removing the oil filter! | 11803 |
|
Oil Pressure & Oil Temperature Adapter |
||
| Fits 81-92 except 83-85 12A. Features 2 1/8" NPT holes for electric gauges. Mechanical oil pressure gauges should fit. Includes 2 new o-rings. | ||
| 80-92 Oil Filter Tower Adapter Red | MRS-OIL-RED |
|
| 80-92 Oil Filter Tower Adapter Blue | No Longer Available | |
| Oil Hose Retaining Clip and Connector | ||
 |
93-95 | 14-6220-N3A1 |
 |
93-95, 04-ON | 14-8500-N3G1 |
| Mazdatrix Home Page | Click part number for price | View Cart |
