New Mazdatrix RX-8 Products

Mazdatrix RX-8 Home Page Click part number for price View Cart

RX-8 Turbo Manifold for Mazdatrix Streetable Kit (Under development check back soon)

Single Adjustable

Eibach's Multi-Pro R1 Coil-Over Kits are race-ready and use a monotube damper design for maximum track performance. Ride height is adjustable between 0.80” to 2.5” lower than stock( depending on application) and the dual spring set-up is dialed for maximum cornering performance. The kits feature single adjustable rebound and compression damping as well as a monotube design with 46mm pistons for enhanced street and track performance.		 5544.712
Double Adjustable, with Remote Reservoirs

Eibach's Multi-Pro-R2 Coil-Over Kits allow for precise tuning of corner weights for optimum handling balance and offer a wide range of damping adjustability to further tune for comfort, ultimate grip or anything in between. The kits feature independently adjustable rebound and compression damping with remote reservoir as well as a monotube design with 46mm pistons for enhanced street and track performance. Ride height is adjustable between 0.80” to 2.5” lower than stock( depending on application)		 5536.713
Brand New Wide Body !!!! Flares fit OVER the '09 Pieces shown below --
Set of 4 is Part Number FG-FLARES-RX809
Flares move fender edge out 2.5"

09- Body kit -- See below for the individual pieces
Pictures of the Wide Body on Display at the Long Beach Formula D Event
Pictures On the Track

Fiberglass Nose for 2009 - and On
(See **Notes below to fit this on 2004-2008 RX8's)
Mazdatrix 09-on Nose Mazdatrix 09-on Nose Mazdatrix 09-on Nose Mazdatrix 09-on Nose
Mazdatrix 09-on Nose REALLY nice piece with built-in splitter
Accepts OEM 2009+ Fog lights and Bumper trim pieces.

Supplied in gelcoat, usually white -- needs painting to match your car.
As with normal fiberglass body parts, it will have minor imperfections, and should be installed and painted by a professional body shop. Yes, it needs mounting holes drilled in it.		 FG-FBUMPR-RX809
** This nose can be installed on 2004-2008 RX8's, BUT additional parts must be purchased (obtained?).
For 04-08 installations some undertray fabrications will need to be done. It appears the mounting brackets under the front of the hood differ between the 04-08 and the 09+ cars.
Needs '09+ front fenders and headlights.		 Parts needed for 04-08 installation:
Right Front 09+ Fender: 52-1000-FFY4
Left Front 09+ Fender: 52-2000-FFY4
(We assume the "w/o aero" means they just don't have all the holes drilled in them to mount the OEM "aero" package parts)
2009 - on Headlights    
Side WITH HID Without HID
Left 51-041C-FF16 51-0L0E-FF14
Right 51-031C-FF16 51-0K0E-FF14
(HID means High Intensity Discharge)
Our Tubocharged RX8 Race Car that we are mounting this nose on does not need headlights, so we have made these fiberglass "replacements".

Probably white gelcoat, NO method of mounting them - you are own your own.

No price, no part number -- call us if you want to just cover the hole where the headlights should be.

09-on Fiberglass Rear Bumper
(See notes below for differences on 04-08 Reat Lights)    

Supplied in gelcoat, usually white -- needs painting to match your car.
As with normal fiberglass body parts, it will have minor imperfections, and should be installed and painted by a professional body shop. Yes, it needs mounting holes drilled in it.		 FG-RBUMPR-RX809
Note- DOES fit on 04-08 (as shown in pictures), BUT the lights are a slightly different shape at the bottom.
Take a look at the pictures and decide if it is worth doing anything about it - we are going to leave it alone on our Time Attack car.

04-on Sideskirts
FG-SIDES-RX809

 

RX8 Rear Subframe Aluminum Bushing Kit
Bushings made out of billet aluminum to solidly mount the rear subframe. 04-8004-0000

 

Header for RX8
The construction is 100% 304-stainless steel and includes a genuine OEM outlet flange. 16133

 

Billet Volume Knob This direct replacement knob comes complete with insert, just pull your oem knob off, and press this one on!


Click Here
Click for larger image, installed.

 

Now Available!

Racing Beat Gauge Panel Kit

 Monitor critical engine performance on your RX-8 with this fully functional Racing Beat Gauge Panel Kit. This kit is fully assembled and is ready for installation in your RX-8! Note: Although it is possible that this unit will mount in the auto transmission equipped RX-8, the installation instructions were written for the installation of the sensor lines through an opening near the manual shift arm.
Click here for more information

 

Racing Beat Catalytic Converter Replacement Pipe Click Here
Coilovers - Street and Track Applications Click Here
Tokico DSpec Suspension Package Click Here
Performance Brake Pads Click Here
Racing Beat Race Full Exhaust System Click Here
Mazdaspeed Shocks Click Here
Tokico Shocks Click Here
Koyo Radiator Click Here
Racing Beat Oil Sensor Adapter Click Here
Racing Beat Water Sensor Adapter Click Here
Silicone Radiator Hoses Click Here

 

Mazdatrix RX-8 Home Page Click part number for price View Cart