Limited Slip Diffs & LSD Rebuild Parts
Return to Main Trans/Diff Page
| Mazdatrix Home Page | Click part number for price | View Cart |
| Limited-Slip Units (71-92) | ||
![]() |
84-85 12A and 13B (Stock) | No Longer Available |
| 86-88 Non-turbo GXL | No Longer Available | |
| 86-92 Turbo (Stock) | 27-200B-P090 | |
| Kaaz LSD 1.5 Way* (Road Racing) | ||
|
84-92 N/A | DBZ1810 |
| 84-92 N/A WPC** COATED | DBZ1810-WPC | |
| 87-88 TURBO | SBZ1310 | |
| 87-88 TURBO WPC** COATED | SBZ1310-WPC | |
| 89-92 TURBO | SBZ1315 | |
| 89-92 TURBO WPC** COATED | SBZ1315-WPC | |
|
| Kaaz LSD 2 Way* (Drifting) | ||
|
84-92 N/A | DBZ1810-2 |
| 84-92 N/A WPC** COATED | DBZ1810-WPC-2 | |
| 87-88 TURBO | SBZ1310-2 | |
| 87-88 TURBO WPC** COATED | SBZ1310-WPC-2 | |
| 89-92 TURBO | SBZ1315-2 | |
| 89-92 TURBO WPC** COATED | SBZ1315-WPC-2 | |
| Kaaz Gear Oil | ![]() |
|
| Kaaz recommends using ONLY their gear oil in their LSDs. Using synthetic oil will destroy your diff. | ||
| Part Number (per 2.0 Liters) | GL-5/80W-90 | |
| Turbo Diff Stub Shafts | ||
| 87 Turbo
LSD (-608385) |
27-270A-P016 | ![]() |
| 87-88 Turbo LSD (608385+) |
27-270B-P019 | |
| 89-92 Turbo Left Viscous (Short) | 27-280B-P094 | |
| 89-92 Turbo Right Viscous (Long) | 27-270A-P094 | |
| Torque Sensing Limited Slip ("Torsen LSD") | ||
![]() |
84-92 Non-turbo | MZTX-TORSEN1 |
| 93-95 Twin Turbo | 27-200E-P099 | |
| These very unique torque sensing differential limited slip units
are now available for 84 and later RX-7's. They really are the absolute best
design for rear traction under ALL different conditions. It is able to transmit
far more torque to the wheel that still has traction than any other type of
differential. It uses the friction of the worm gear teeth and the thrust
washers for the differential limiting force. In comparison with viscous type,
or friction type LSD, it has the following benefits: 1) Large bias ratio torque proportioning 2) Less change of bias ratio over time of car use 3) No special differential oil or LSD additives needed 4) Improved overall traction and improved controllability under acceleration. 5) Virtually no change of torque sensing or traction control through differential temperature range. |
||
| 81-88 Limited Slip Differential Rebuild Clutch Parts: | |||
| Cone Spring (2 needed) |
Non-Turbo | 27-2590-M020 | |
| Turbo | Not Used | ||
| LSD Disc w/inside pins | Non-Turbo (Uses 4) |
27-2560-M020 | |
| Turbo (Uses 4) |
27-2560-P020 | ||
| LSD Disc w/outside pins | Non-Turbo (Uses 4) |
27-2580-M020 | |
| Turbo (Uses 6-outer) |
27-2660-P020 | ||
| Turbo (Uses 2-inner) |
27-2580-P020 | ||
| Use the high performance parts below for stronger lockup.
Interchange these thicker parts to create a thicker stack, which will have a higher clamping force. |
|||
| LSD Disc w/inside pins +.1mm (Uses 4) |
Non-Turbo | 27-2570-M020 | |
| Turbo | 27-2570-P020 | ||
| Oversized Thrust Washer (Two Needed - High Performance) | Non-Turbo + .2mm |
27-2530-M020 | |
| Turbo + .1mm | 27-2530-P020 | ||
| Turbo + .2mm | 27-2540-P020 | ||
Continue to Next Differential Page_|_Return to Main Transmission and Differential Page
| Mazdatrix Home Page | Click part number for price | View Cart |