RX8 Oil System Parts
Mazdatrix RX-8 Home Page Click part number for price View Cart

 

 

OEM Mazda style Oil Filter 14-302A-G6Y0
Oil Pan Drain Plug 10-4040-HE03
Oil Drain Plug Washer 41-4000-9956
Mazdaspeed Oil Cap
Click on Image For Picture on Engine
8R-D09-0000
Oil Filter Mount Gasket 14-3420-N3H1 Image Soon

 

K&N Oil Filter
K&N Performance Gold® Oil Filters for the RX8 have been constructed from the ground up to satisfy the high performance needs of race car owners and drivers, as well as the average vehicle owner who wants the very best oil filter available. K&N's oil filter's efficiency rating meets or exceeds the requirements of high performance automotive engine builders. The real quality is the inner filter element that traps contaminant as small as 10 to 20 microns in size. They use metal top end caps instead of paper to ensure that no unfiltered oil can get back into the system. The solid construction allows for oil flow rates between 12-16 gallons per minute. All K&N Performance Gold® Oil Filters are manufactured to exacting engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturers recommended service interval.
K&N Filter Part Number HP-1008

 

Engine Oil Pump 14-1000-N3H1 RX8 Oil Pump
Oil Metering Pump 14-600C-N3H1 Image Soon
Oil Metering Pump to Engine O-Ring 14-6040-N3H1
Oil Pan 10-4AXA-N3H8
Oil Pick Up Tube 14-240A-N3H1 RX8 Oil Pick Up Tube

 

Oil Hose Retaining Clip and Connector
Oil Hose Retaining Clip 93-95, 04-ON 14-6220-N3A1
93-95, 04-ON 14-8500-N3G1

Racing Beat Oil Pressure and Temperature Adapter
Oil Filter Tower Adapter The Oil Pressure and Temperature Sensor Adapter unit allows for easy installation of sender units for most popular gauges (1/8-inch female pipe for oil pressure and 3/8-inch female pipe for oil temperature). The machined-aluminum adapter will accommodate either mechanical or electrical senders. The adapter mounts immediately below the oil filter assembly and includes a mounting O-ring and detailed installation instructions. Easily installs by simply removing the oil filter! 11803

 

Idemitsu 10w-30 Oil Idemitsu Racing Engine Oil
Idemitsu Rotary Engine Oil is the only oil specifically designed to be used in the rotary engine. As the developer of the engine oil for the winning 1991 LeMans Mazda 787B and a long time supplier of vital lubricants to Mazda, Idemitsu has intimate knowledge of the requirements of rotary engines.
10W-30 - Per Quart IDE-10W-30
10W-30 - Per 12qt Case IDE-10W-30-CS
20W-50 - Per Quart IDE-20W-50
20W-50 - Per 12qt Case IDE-20W-50-CS

 

Idemitsu Rotary Premix Idemitsu Racing Rotary Fuel Lube (Premix) - Synthetic Blend

Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way to lubricate more of your engine and prevent premature catastrophic damage.
A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed. Special detergent/dispersant additives keep your fuel injectors clean to reduce maintenance. Provides additional lubrication for apex and side seals to increase seal life and increase the efficiency of the engine. Special additives allow for better sealing of the chamber, creating greater efficiency and more power.

Available by the quart or by the case

Quart IDEM-PREMIX 12qt Case IDEM-PREMIX-CS

 

Mazdatrix RX-8 Home Page Click part number for price View Cart